MA6300
OCCASIONE DEMO 1 PEZZO
*
*
Integrato da 2 x 100 Watts / 8 ohms - 7 ingressi linea ( 1 phono) - 1 ingresso CD bilanciato
VU Meter - Power Assurance System - telecomando
CLICCA QUI PER LA SCHEDA COMPLETA
RECENSIONE ITALIANA AUDIOREVIEW
POWER OUTPUT
100 watts into an 8 ohm load is the minimum sine wave continuous average power output. The output RMS voltage is 28.3V across 8 ohms.
160 watts into a 4 ohm load is the minimum sine wave continuous average power output. The output RMS voltage is 25.3V across 4 ohms.
OUTPUT LOAD IMPEDANCE: 8 and 4 ohms
RATED POWER BAND: 20Hz to 20kHz
TOTAL HARMONIC DISTORTION
0.005% max harmonic distortion at any power level from 250 milliwatts to rated power, 20Hz to 20kHz
DYNAMIC HEADROOM: 1.4dB
FREQUENCY RESPONSE
+0, -0.5dB from 20Hz to 20kHz
+0, -3dB from 10Hz to 100kHz
PREAMPLIFIER MAIN OUTPUT
1V for rated input (8V maximum)
SENSITIVITY (FOR RATED OUTPUT)
High level: 250mV unbalanced, 500mV Balanced; Phono: 2.5mV; Power Amp In, 1V
SIGNAL-TO-NOISE RATIO (A-Weighted)
High Level: 97dB below rated output
Phono: 90dB below 10mV input
Power Amplifier: 110 below rated output
INTERMODULATION DISTORTION
0.005% max, if the instantaneous peak power output is rated power or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz
WIDE BAND DAMPING FACTOR:
200 at 8 ohms; 100 at 4 ohms
INPUT IMPEDANCE:
High Level: 20K ohms; Phono: 47K ohms: 65pF; Power Amp In: 10K ohms
MAXIMUM INPTU SIGNAL
High Level: 8V; Phono: 90mV; Power Amplifier In: 8V
MAIN OUTPUT IMPEADANCE: 50 ohms
POWER GUARD:
Less than 2% THD with up to 16dB overdrive at 1000Hz
VOLTAGE GAIN:
High Level to Tape Output: 0dB
High Level to Main Output: 12dB
Phono to Main Output: 52dB
POWER REQUIREMENTS:
|
Amplificazione 
